TRILIGENT tape feeders

TRILIGENT tape feeders

  • TRILIGENT tape feeders
  • TRILIGENT tape feeders

The TRILIGENT tape feeder ensures simple setup change. You can insert the mounted feeder(s) into any slot while the machine is running.  The machine recognizes the feeder, the mounted component and the position.

Repetitive errors are virtually ruled out as feeder and components are coded.

More information

Tape feeders are available for all common tape widths (8 to 88 mm) and reel sizes. In addition, special editions of tape feeders are available for components up to 12 mm height (deep blister pockets).

Following versions are supplied as standard:

  • TRILIGENT tape feeder   8 mm, d = 380 mm
  • TRILIGENT tape feeder 12 mm, d = 380 mm
  • TRILIGENT tape feeder 16 mm, d = 380 mm
  • TRILIGENT tape feeder 16 mm, d = 380 mm (for deep blister pockets)
  • TRILIGENT tape feeder 24 mm, d = 380 mm
  • TRILIGENT tape feeder 24 mm, d = 380 mm (for deep blister pockets)
  • TRILIGENT tape feeder 32 mm, d = 380 mm
  • TRILIGENT tape feeder 44 mm, d = 380 mm
  • TRILIGENT tape feeder 56 mm, d = 380 mm
  • TRILIGENT tape feeder 72 mm, d = 380 mm
  • TRILIGENT tape feeder 88 mm, d = 380 mm

TRILIGENT Vibrationsfeeder

TRILIGENT vibration feeders

At the TRILIGENT vibration feeder V8 the components are vibration-forwarded within the exchange bar to reach the pick position. At the TRILIGENT vibration feeder V32 the components are vibration-forwarded onto the presentation plate where they reach the pick position. At the V24 size both concepts are possible.

More information

The following feeder versions can be supplied:

  • TRILIGENT vibration feeder V8
  • TRILIGENT vibration feeder V24
  • TRILIGENT vibration feeder V32
  • TRILIGENT Vibrationsfeeder
  • TRILIGENT Vibrationsfeeder

TRILIGENT label feeder

TRILIGENT  label feeder

The TRILIGENT label feeder provides automated labeling of boards, sub-panels or components (e.g. EPROMs) by the placement machine. Among the wide range of possible applications for this feeder type are e.g. placement of labels to cover vias during the soldering process or attachment of ID labels on boards and components.

The labels (barcode, Data Matrix, etc.) are fed on a carrier tape like taped components.

Vacuum nozzles are used for placement. Presence and position of the label is checked and aligned by the vision system to ensure precise, repeatable attachment on the board.

Setup procedure is exactly the same as for standard feeders. The placement machine automatically recognizes the slot where the label feeder is inserted.

Feeder cart

MIMOT feeder cart

The MIMOT feeder cart is used for proper, careful and clear storage of MIMOT feeders. Special feeder carts are available for the innovative TR feeders with their continuous data connection to the MIMOT prep software and the placement machines.

Whether feeders are inserted in placement machines or are stored in feeder carts, operators can use the Prep PC or the screen of the placement machine to see, where individual feeders are located and what components are mounted on.

What’s more, the various indication possibilities of the triple LED on each feeder remain active when the feeder is stored at the feeder cart. When searches are run, the feeder will respond by flashing the according LED – even when stored at the feeder cart.

Setting up the machine is optimally supported per software: The LED of the feeder to be inserted flashes – the LED of the target slot of the machine flashes – even if the feeder is stored at the feeder cart. Fast and optimized. It’s that simple!

The following types of feeder carts are available:

  • TR feeder cart “master” containing one level of approx. 1 x 72 “S8” feeder slots
  • TR feeder cart “master” containing two levels of approx. 2 x 72 “S8” feeder slots
  • TR feeder cart “slave” containing one level of approx. 1 x 72 “S8” feeder slots
  • TR feeder cart “slave” containing two levels of approx. 2 x 72 “S8” feeder slots

Feeder carts without connection with the Prep PC or the placement machine are also available:

  • Feeder cart “master” containing two levels of approx. 2 x 77 “S8” feeder slots
  • Feeder cart “master” containing two levels of approx. 2 x 64 “S8” feeder slots
  • Feeder cart “master” containing three levels of approx. 3 x 64 “S8” feeder slots

Feeder mounting - feeder jig

MIMOT TR feeder jig

The special feeder jig for TRILIGENT feeders significantly facilitates component mounting and adjustment of the feed unit of TRILIGENT tape feeders.

After the feeder is inserted into the jig the operator has both hands free to conveniently mount the reel or the stick on the feeder. The inclination of the jig can be adjusted continuously.

The integrated power supply enables simple mounting and dismantling of feeders.

Feeder setup - setup station

MIMOT setup station

  • Feeder setup - setup station
  • Feeder setup - setup station
  • Feeder setup - setup station

Ergonomic workplace for typical setup operations like data entry, component storage, mounting and dismantling of feeders, optimization of placement programs.

More information
  • Conductive work surface (ESD protection)
  • Storage space for Prep PC, barcode scanner and barcode printer
  • Feeder jig can be fixed in two angles of inclination
  • Comfortable user interface via touch screen display

Tools

MIMOT vacuum nozzles - vacuum grippers

The placement head module picks up suitable vacuum nozzles or vacuum grippers to pick components from feeders. After centering the components via the vision system the machine places the components on the board.

Due to the availability of various nozzle and gripper tool types the placement head is capable of placing all standard SMT components and a great variety of odd shaped components as well.

More information

We would be glad to check, whether your special component can be placed using a standard tool. Otherwise a new tool type must be designed and manufactured.

The following types of vacuum nozzles are available:

  • Vacuum nozzle 2.0
  • Vacuum nozzle 2.0 with flat vacuum cup
  • Vacuum nozzle 2.0 R1.5
  • Vacuum nozzle 3.0
  • Vacuum nozzle 3.5 with flat vacuum cup
  • Vacuum nozzle 3.5 with twin flat vacuum cup
  • Vacuum nozzle 4.0
  • Vacuum nozzle 4.0 short version
  • Vacuum nozzle 5.0
  • Vacuum nozzle 5.0 with flat vacuum cup
  • Vacuum nozzle 5.0 R2.3 (l = 8 mm) for micro fuse d = 5 mm
  • Vacuum nozzle 6.0
  • Vacuum nozzle 13.0 (O ring with suction cup)
  • Vacuum nozzle 13.0 (O ring, hollow)
  • Vacuum nozzle 0201 C (high packing density, long service life)
  • Vacuum nozzle 0402 C (long service life)
  • and many more ...
  • Tools
  • Tools
  • Tools
top